Chainmaster D8+ Ultra/DC 750kg 4m/min 24m

The Chainmaster D8+ Ultra/DC 750 kg chain hoist is designed for professional rigging applications in concert, theatre, broadcast and touring environments. This model distinguishes itself through its D8+ configuration, dual DC braking system and a friction clutch that protects the drive mechanism.

Key features

• 750 kg WLL (Working Load Limit) — D8+ configuration
• Fully enclosed aluminium casting for increased durability and component protection
• Black RAL 9005 finish (custom colours available on request)
• Dual DC brakes (operational + safety) with fail-safe functionality
• Friction clutch for drive protection under overload conditions
• Low-noise operation suitable for theatres, studios and live productions
• Textile chain bag for compact handling and transport

Configuration & specifications

• Capacity: 750 kg WLL
• Lifting speed: 4 m/min
• Chain length: 24 m
• Chain size: 4×12 mm (DIN EN 818-7)
• Control: 3-phase operation
• Brake system: Dual DC fail-safe brakes
• Version: D8+ Ultra/DC

Application

D8+ chain hoists are widely used in professional rigging to position trusses, lighting and audio components. The dual-brake configuration and D8+ classification enable controlled load movement and increased safety requirements within production environments. The Ultra/DC series is suitable for repetitive show builds, touring and fixed installations where reliability, low-noise operation and consistent performance are essential.

Rent the Chainmaster D8+ 750 kg at Rigging Box

The Chainmaster D8+ 750 kg chain hoist is suitable for professional rigging in touring, theatre, broadcast and live productions, and can be supplied with matching motor cabling and hoist control. Based on a sketch, location description or rigging plan, the required quantities and chain lengths can be determined for the intended configuration. Where needed, Rigging Box can advise on setup, configuration and compatible rigging equipment.

Frequently Asked Questions about the Chainmaster D8+ 750 kg (FAQ) 

What is a D8+ chain hoist and how does it differ from a D8 hoist?

A D8+ chain hoist is built with additional safety measures compared to a standard D8 hoist. While a D8 hoist is intended for safe lifting and positioning of loads (typically without overhead loads above an audience), a D8+ hoist incorporates extra features such as dual brakes and specific chain requirements. These measures allow controlled positioning and higher safety margins within professional rigging environments.

Where is a 750 kg D8+ hoist such as the Chainmaster used?

A 750 kg D8+ hoist is commonly used in professional rigging for medium-weight loads including truss, lighting, audio line arrays, décor elements and show components in concert venues, theatres, festivals, touring productions, trade shows and broadcast studios.

Which hoist control and cabling can be used with a D8+ chain hoist?

The required hoist control and cabling depend on the number of hoists and the desired operating method. Single or paired hoists can be controlled via a simple controller, while larger installations typically use multi-channel controllers with group or zone control. Cabling must match the hoist’s power, control voltage and connector configuration.

How is a D8+ chain hoist inspected and certified?

D8+ hoists undergo periodic inspection and certification in accordance with applicable lifting and rigging standards. During inspection, components such as brakes, chain condition, housing, friction clutch and electrical functionality are examined. After approval the hoist is registered and provided with a certification status confirming suitability for use in professional productions.

Can Rigging Box advise on quantities and configuration of D8+ hoists?

Yes. Based on a sketch, location description or technical rigging plan, the required quantities, chain lengths, hoist control and supplementary rigging equipment can be determined. Rigging Box can provide guidance on setup, configuration and material selection for the intended production.